2
1. Introduction
This specification describes a 20.1" UXGA TFT LCD monitor with a power adapter. It supports maximal resolution up to
1600×1200 and analog and digital inputs with DPMS. It also supports S-VIDEO and COMPOSITE video inputs. It features:
- Auto Key(Automatic adjustment function)
- User control: on/off switch, OSD control, brightness and contrast quick access, and input source selection keys
- Multi-timing support
- High quality advanced scaling function
- Power on/off indicator
- 4 input indication LEDs
- Universal power adapter
- 0.255(W)×0.255(H) mm dot pitch LCD panel
- PIP (picture in picture) feature
- Fancy OSD features:16-bit bitmap color for the splash screen, 16 pallets out of 16 bits colors for the OSD icons.
It is composed of the following materials:
-An LCD monitor (an LCM with TMDS interface, an I/F board, two control boards, and an inverter)
-A 15 pin D-SUB cable and a DVI-D signal cable
-A power adapter and a power cord
-Tilt and swivel base
-User manual / CD-ROM with E-doc, .inf/icm , and .cat (including both analog & digital registrations)
2. Pacific Specification
2.1 GENERAL DESCRIPTION
2.1.1 Display Data Area (with full white pattern)
(1) Horizontal 408 mm
(2) Vertical 306 mm
2.1.2 Video Performance
(1) Resolution UXGA 1600 × 1200 × R,G,B Maximum
(2) Display color 16.7 M colors
2.1.3 LCD technology
IPS(In phase switching) technology.
2.1.4 I/F
A D-SUB analog input, DVI-D digital input and 2 video inputs (S-VIDEO and COMPOSITE video ports).
2.2 ELECTRICAL CHARACTERISTICS
2.2.1 POWER SUPLLY
(1) Type external power adapter in IEC-320/CEE-22 female type
(2) Specification See Appendix 0 - Power Supply
(3) Power cable With the length of 1.8 meter, detachable and black color.
(4) Adapter cable Type captive DC power cable. The free end of this cable has a
pin-in-socket type connector for attaching to the monitor.
To Next Page
Loading...
Need help?
General