Dell 2000FP User Manual

Dell 2000FP LCD Monitor Service Guide
Engineering Specification
Confidential
5
(3) OSD Main Specification 5 languages
Format & Functionality See Appendix 4 – OSD Format-Function
Special Indications See Appendix 5 – Special Indications
2.2.7 PC INTERFACE
(1)DDC Type Monitor complies with VESA DDC standard, Version 2.0.
Required custom EDID files. Digital-Ver 1.3, Analog-
Ver1.3. See Appendix 7 – EDID Content
(2)DPMS Type Monitor includes VESA DPMS feature
Power Consumption See Appendix 8 –Power State Maximums
2.2.8 SHIPMENT CONDITIONS
(1) Shipment conditions Monitor is to be shipped with the setting described in
Appendix 17 – Shipment Conditions
2.3 LCD MODULE
2.3.1 LCD MODULE
(1) Main specification See Appendix 9 – LCD Module Specifications
(2) Defects See Appendix 12 – LCD Module Defects
(3) Display Degradation Over the life of the product, variation parameters defined
in Appendix 12 will not vary.
2.4 FRONT OF SCREEN
2.4.1 Min. functional warm-up time
3 mins
2.4.2 Specification
(1) FOS associated with LCD See Appendix 13 – FOS (front of screen) Specifications
Module performance
(2) Measurement conditions See Appendix 14 – FOS Notes
(3) FOS reliability Over the life of the product, parameters defined in
Appendix 13 and 14 will not vary, excluding any
parameters depending on CCFL operation.
2.5 MECHANICAL
2.5.1 INDUSTRIAL DESIGN
(1) Label and marking See Appendix 2 – Labels and Markings. All labels and
markings must be legible and sharp, positioned as shown
in the drawings, and properly aligned. Using the
time/distance criteria as given for the cosmetic
inspection in Appendix 10- Mechanical , no missing parts
of the characters or the DELL logo will be observed. All
labels and marking must be approved by DELL.
2.5.2 MECHANICAL SPECIFICATIONS

Dell 2000FP Specifications

General

Brand	Dell
Model	2000FP
Category	Monitor
Language	English