Print Media Guidelines 13
In some cases, you can adjust registration with your software program to successfully print on
these forms.
• Coated papers (erasable bond), synthetic papers, thermal papers
• Rough-edged, rough or heavily textured surface papers or curled papers
• Recycled papers containing more than 25% post-consumer waste that do not meet DIN 19
309
• Multiple-part forms or documents
• Print quality may deteriorate (blank spaces or blotches may appear in the text) when printing
on talc or acid paper.
Selecting Paper
Proper paper selection helps prevent jams and ensures trouble-free printing.
To help avoid jams or poor print quality:
• Always use new, undamaged paper.
• Before loading the paper, identify the recommended print side of the paper. This information
is usually indicated on the paper package.
• Do not use paper that you have cut or trimmed yourself.
• Do not mix print media sizes, weights, or types in the same source. This may result in a paper
jam.
• Do not remove trays while a job is printing or
Printing
is displayed on the operator panel.
• Make sure the
Paper Type
setting is correct. (See "Tray Settings" for detailed information
about these settings.)
• Make sure the paper is properly loaded in the tray.
• Flex paper back and forth, and then fan them. Straighten the edges of the stack on a level
surface.
To Next Page
Need help?
General
