10 About Your Monitor
6
7
8
9
Connect the USB cable from the monitor to the
USB upstream port computer to allow you to use the USB ports and
touch screen function on the monitor.
Connect your USB device. You must connect the
USB 2.0 downstream
USB upstream cable to your monitor and computer
ports
before you can use these ports.
Use a security cable to prevent unauthorized
Security cable slot removal of the monitor. (security cable sold
separately)
Use a M3 x 6 mm screw to lock the stand to the
Stand lock
monitor. (screw not included)
Specifications
Panel
Screen type Active matrix - TFT LCD
Panel type TN
Viewable image
Diagonal 49.41 cm (19.5 inches)
Horizontal Active Area 432.00 mm (17.01 inches)
Vertical Active Area 239.76 mm (9.44 inches)
Area 103576.32 mm
2
(160.54 inch
2
)
Pixel pitch 0.27 mm (H) x 0.27 mm (W)
Viewing angle
Horizontal 170 degrees (typical)
Vertical 160 degrees (typical)
Luminance
Panel 250 cd/m
2
(typical)
Monitor 225 cd/m
2
(typical)
Contrast ratio 1000:1 (typical)
Dynamic contrast ratio 8,000,000 : 1
Faceplate coating Anti-glare with hard coating 3H
Bezel gloss 3~5 gloss units
Touch glass gloss >30 gloss units
NOTE: The user should consider the placement of
the display as the reflection of surrounding light and
bright surfaces from the glass may cause
disturbances to users.
Backlight LED edgelight system
Response time 2 ms (with overdrive)
Color depth 16.77 million colors