Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Procedure
1 Disconnect the speaker cable from the system board.
2 Peel off the pieces of tape that secure the speaker cable to the palm-rest
assembly.
3 Remove the speaker cable from the routing guides on the palm-rest
assembly.
4 Note the position of the rubber grommets before lifting the speaker.
43