Dell Inspiron 1300 User Manual


12. Lift the display assembly out of the computer base.
Removing the Display Bezel



1. Follow the instructions in Before Working Inside Your Computer.

2. Remove the display assembly. See Removing the Display Assembly.

3. Use a plastic scribe to pry the six screw covers/display bumpers out of the screw holes on the front of the bezel.

4. Remove the six M2.5 x 5-mm screws from the front of the bezel.

5. Starting at the bottom of the display panel, use your fingers to separate the bezel from the top cover and lift the inside edge of the bezel away from the
top cover.
1
antenna cable
2
display cable


1
antenna cable
2
display cable pull tab


NOTICE: Be careful not to damage the display switch when removing the display.
CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel.

Dell Inspiron 1300 Specifications

General

Graphics	Intel GMA 900
Processor	Intel Celeron M or Intel Pentium M
RAM	256 MB to 2 GB
Storage	40 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Optical Drive	DVD+/-RW
Operating System	Windows XP Home or Windows XP Professional
Weight	2.95 kg (6.5 lbs)
Battery	6-cell lithium-ion
Dimensions	10.5"