Dell P175G User Manual

Figure 21. Installing the base cover
Steps
1. Place the base cover on top of the palm-rest and keyboard assembly.
2. Align the screw holes on the base cover with the screw holes on the palm-rest and keyboard assembly, and snap the base
cover latches into place.
3. Tighten the eight captive screws to secure the base cover to the palm-rest and keyboard assembly.
Next steps
1. Follow the procedure in After working inside your computer.
Solid-state drive
Removing the M.2 2230 Solid State Drive
Prerequisites
1. Follow the procedure in Before working inside your computer.
NOTE: SSDs are fragile. Exercise care when handling the SSD.
NOTE: To avoid data loss, do not remove the SSD while the computer is in sleep or on state.
52 Removing and installing Customer Replaceable Units (CRUs)

Dell P175G Specifications

General

Brand	Dell
Model	P175G
Category	Laptop
Language	English