Dell P70F User Manual

Replacing the hard drive
Enable Intel Optane after replacing the SATA storage. For more information about enabling the Intel Optane, see Enabling Intel
Optane.
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
Topics:
• Procedure
• Post-requisites
Procedure
1. Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.
2. Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
3. Connect the interposer to the hard-drive assembly.
4. Align the screw holes on the hard-drive assembly with the screw holes on the palm-rest assembly and keyboard shield.
5. Replace the three screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly and keyboard shield.
6. Connect the hard-drive cable to the connector on the system board.
Post-requisites
Replace the base cover.
8
18 Replacing the hard drive

Dell P70F Specifications

General

Brand	Dell
Model	P70F
Category	Laptop
Language	English