Replacing the solid-state drive/ Intel Optane
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Topics:
• Procedure
• Post-requisites
Procedure
1. Align the notch on the solid-state drive/Intel Optane memory with the tab on the solid-state drive/Intel Optane memory slot.
2. Slide the solid-state drive/Intel Optane memory firmly into the solid-state drive/Intel Optane memory slot at an angle.
3. Press the other end of the solid-state drive/Intel Optane memory and replace the screw (M2x3) that secures the solid-state
drive/Intel Optane memory to the keyboard shield.
Post-requisites
Replace the base cover.
10
20 Replacing the solid-state drive/ Intel Optane