Dell PowerEdge T110 User Manual

40 Using the System Setup Program and UEFI Boot Manager
SATA Settings Screen
Logical Processor
(Enabled default)
On processors that support Simultaneous Multi-
Threading (SMT) technology, each processor core
supports up to two logical processors. If this field is set to
Enabled, the BIOS reports both logical processors. If set
to Disabled, only one logical processor is monitored by
the BIOS.
Virtualization Technology
(Disabled default)
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE: Disable this feature if your system will not be
running virtualization software.
Execute Disable
(Enabled default)
Enables or disables Execute Disable Memory Protection
Technology.
Number of Cores per
Processor
(All default)
If set to All, the maximum number of cores in each
processor is enabled.
C States
(Enabled default)
When set to Enabled, the processor can operate in all
available power states.
Tu r b o M o de
(Enabled default)
If Turbo Boost Technology is supported by the processor,
enables or disables Turbo Mo de .
Processor 1 Family -
Model-Stepping
Displays the family, model, level 2 cache size, level 3,
cache size, and number of cores of the processor.
Level 2 Cache Displays the amount of cache memory for the processor.
This option does not have user-selectable settings.
Number of Cores Displays the number of cores in the processor. This
option does not have user-selectable settings.
Option Description
SATA Controller
(AHCI default)
Allows the embedded SATA to be set to Off, ATA, AHCI,
or RAID modes.
NOTE: The UEFI support is disabled if SATA is set to the
RAID mode.
Option Description
Mayzie_HOM.book Page 40 Monday, August 31, 2009 9:33 PM

Dell PowerEdge T110 Specifications

General

Tcase	72.7 °C
Bus type	DMI
Stepping	B1
FSB Parity	No
Processor code	SLBLD
Processor cache	8 MB
Processor cores	4
Processor model	X3450
System bus rate	2.5 GT/s
Processor series	Intel Xeon 3400 Series
Processor socket	LGA 1156 (Socket H)
Processor threads	8
Processor codename	Lynnfield
Processing Die size	296 mm²
Processor frequency	2.66 GHz
Processor cache type	Smart Cache
Processor lithography	45 nm
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	- MHz
Processor boost frequency	3.2 GHz
Processor operating modes	64-bit
ECC supported by processor	Yes
PCI Express configurations	1x16, 2x8, 4x4
Supported instruction sets	SSE4.2
Thermal Design Power (TDP)	95 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	20
Maximum number of PCI Express lanes	16
Memory types supported by processor	DDR3-SDRAM
Number of Processing Die Transistors	774 M
Memory channels supported by processor	Dual
Memory clock speeds supported by processor	800, 1066, 1333 MHz
Memory bandwidth supported by processor (max)	21 GB/s
Maximum internal memory supported by processor	32 GB
HDD size	3.5 \
Hot-swap	-
HDD capacity	500 GB
HDD interface	Serial ATA
Optical drive type	DVD-ROM
Total storage capacity	1000 GB
Maximum storage capacity	- TB
Number of HDDs installed	2
Internal memory	4 GB
Memory clock speed	1066 MHz
Maximum internal memory	16 GB
Memory layout (slots x size)	2 x 2 GB
Graphics card	G200eW
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
PCI Express slots version	2.0
Power supply	305 W
Compatible operating systems	Microsoft SQL Server 2008 R2, Microsoft Windows Small Business Server 2008, Microsoft Windows Essential Business Server 2008, Microsoft Windows Server 2008 Foundation R2, Microsoft Windows Server 2008 SP2, x86/x64 (x64 Hyper-VTM), Microsoft Windows Server 2008 R2, x64 (Hyper-VTM v2), Microsoft Windows HPC Server 2008, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux
Chassis type	Tower
Processor ARK ID	42929
Intel® Turbo Boost Technology	1.0

Weight and Dimensions

Depth	463.8 mm
Width	188.64 mm
Height	418.55 mm