Dell PowerEdge T110 User Manual

Using the System Setup Program and UEFI Boot Manager 53
Deleting or Changing an Existing Setup Password
1 Enter the System Setup program and select the System Security .
2 Highlight Setup Password , press <Enter> to access the setup password
window. Press <Enter> twice to clear the existing setup password.
The setting changes to
Not Enabled .
3 If you want to assign a new setup password, perform the steps in "Assigning
a Setup Password" on page 52.
Embedded System Management
The USC is an embedded utility that enables systems and storage
management tasks from an embedded environment throughout the server’s
lifecycle.
The USC can be started during the boot sequence and can function
independent of the operating system.
NOTE: Certain platform configurations may not support the full set of features
provided by USC.
The following features of USC are supported on systems with Baseboard
Management Controller (BMC):
• Installing an operating system
• Running diagnostics to validate the memory, I/O devices, processors,
physical disks, and other peripherals
For more information about setting up USC, configuring hardware and
firmware, and deploying the operating system, see the Unified Server
Configurator documentation on the Dell Support website at
support.dell.com/manuals.
Mayzie_HOM.book Page 53 Monday, August 31, 2009 9:33 PM

Dell PowerEdge T110 Specifications

General

Tcase	72.7 °C
Bus type	DMI
Stepping	B1
FSB Parity	No
Processor code	SLBLD
Processor cache	8 MB
Processor cores	4
Processor model	X3450
System bus rate	2.5 GT/s
Processor series	Intel Xeon 3400 Series
Processor socket	LGA 1156 (Socket H)
Processor threads	8
Processor codename	Lynnfield
Processing Die size	296 mm²
Processor frequency	2.66 GHz
Processor cache type	Smart Cache
Processor lithography	45 nm
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	- MHz
Processor boost frequency	3.2 GHz
Processor operating modes	64-bit
ECC supported by processor	Yes
PCI Express configurations	1x16, 2x8, 4x4
Supported instruction sets	SSE4.2
Thermal Design Power (TDP)	95 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	20
Maximum number of PCI Express lanes	16
Memory types supported by processor	DDR3-SDRAM
Number of Processing Die Transistors	774 M
Memory channels supported by processor	Dual
Memory clock speeds supported by processor	800, 1066, 1333 MHz
Memory bandwidth supported by processor (max)	21 GB/s
Maximum internal memory supported by processor	32 GB
HDD size	3.5 \
Hot-swap	-
HDD capacity	500 GB
HDD interface	Serial ATA
Optical drive type	DVD-ROM
Total storage capacity	1000 GB
Maximum storage capacity	- TB
Number of HDDs installed	2
Internal memory	4 GB
Memory clock speed	1066 MHz
Maximum internal memory	16 GB
Memory layout (slots x size)	2 x 2 GB
Graphics card	G200eW
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
PCI Express slots version	2.0
Power supply	305 W
Compatible operating systems	Microsoft SQL Server 2008 R2, Microsoft Windows Small Business Server 2008, Microsoft Windows Essential Business Server 2008, Microsoft Windows Server 2008 Foundation R2, Microsoft Windows Server 2008 SP2, x86/x64 (x64 Hyper-VTM), Microsoft Windows Server 2008 R2, x64 (Hyper-VTM v2), Microsoft Windows HPC Server 2008, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux
Chassis type	Tower
Processor ARK ID	42929
Intel® Turbo Boost Technology	1.0

Weight and Dimensions

Depth	463.8 mm
Width	188.64 mm
Height	418.55 mm