21
2. Place the jug under the steam wand and press the steam
button (B9) (g. 26).
3. To froth the milk, rest the steam wand (A9) on the surface
of the liquid. This mixes air with the milk and steam.
4. Keep the steam wand in contact with the surface, taking
care not to let in too much air and create excessively large
bubbles.
5. Immerse the steam wand below the surface of the milk,
this creates a vortex in the liquid. Once the milk is heated
to the desired temperature, press the steam button again
and wait for the ow of steam to stop completely before
removing the milk carafe from the machine.
Barista tips:
• Fresh milk is best. Always use fresh milk straight from
the fridge.
• For best results, always replace the milk carafe in the fridge
when not in use.
• Whole milk ensures optimum results. The appearance and
texture of froth depending on the nature of the dairy milk
or vegetable drinks utilized.
• After frothing the milk, eliminate unwanted bubbles by
swirling the jug gently.
Cleaning the steam wand
1. Following use, always wipe the steam wand (g. 27) with a
cloth to remove residual deposits of milk. The recommend-
ed procedure for in-depth cleaning is to use Eco MultiClean:
this product ensures maximum hygiene by removing milk
proteins and fats, and can be used for cleaning the entire
machine.
2. Release steam for a few seconds to clean the wand (g. 8).
3. Wait until the steam wand has cooled down. To ensure the
wand works eciently over time, use the special cleaning
tool (C10) to free the holes (g. 28) of any obstruction.
7. PROGRAMMING DRINK QUANTITIES
1. Prepare the appliance to deliver 1 or 2 cups of the drink you
want to make, as far as attaching the lter holder (C1) com-
plete with the (C3) or (C4) lter and ground coee.
2. Turn the dial (B8) to select the drink being programmed.
3. Press the OK button (B6) and hold for a least 3 seconds,
until the indicator relative to the selected drink starts
to blink, indicating that the machine is in programming
mode.
4. When the desired quantity has been reached, press the OK
button again: the quantity is programmed.
Please note:
• You can programme drinks, but not steam delivery.
• Programming changes the quantity of drink delivered, but not
the quantity of ground coee
• When a programmed drink is selected, the corresponding
light blinks briey.
• “2x” drinks can be programmed separately.
Coee
recipe
Default
quantity
Programmable quantity
≃ 110 ml ≃ 90 to ≃130 ml
2x
≃ 180 ml ≃ 160 to ≃ 220 ml
≃ 35 ml ≃15 to ≃90 ml
2x
≃ 70 ml ≃30 to ≃180 ml
≃ 120 ml
• espresso:
≃
20 to
≃
90 ml
• water: ≃25 to ≃150 ml
2x
≃ 240 ml • espresso: ≃30 to ≃180 ml
• water: ≃50 to ≃240 ml
≃ 250 ml from ≃65 to ≃300ml
8. SETTINGS MENU
1. Access the menu:
Press together and hold
for 3 seconds
+
2. Select the setting to be adjusted
Correspond-
ing setting
Turn
to
Press
Press
again to
change the
setting
Statistics
(info useful
for assistance
purposes)
See section “15.1 Statistica”
→
To Next Page
Loading...
Need help?
General
