RPI M30A/ M50A include a 4x20 character type LCD display and 2 LED
lights to indicate inverter’s status. For physical characteristics.
Please refer to table 5-1 for more information about inverter’s statuses
and LED inducator.
The following section will introduce the functions that can be adjusted by
users through the LCD panel. When you are adjusting settings, LCD panel
will change the display cursor from “►” to “ ”.
5.1 LCD Flow Chart
Power Meter
Energy Log
Event Log
Inverter Information
General Settings
Install Settings
Active/Reactive Power
FRT
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
5.2.9
5.Turn On PV Inverter
WARNING ! BURN HAZARD
The enclosure temperature may exceed 70°C while inverter is operation.
A dangerous burn hazard is present in this situation.
Figure 5-1 panel indicator
40
Turn on PV inverter
To Next Page
Loading...
Need help?
General
