Delta RPI M30A User Manual

5.2.5. Inverter Information
This page can helps user to recognize the inverter. First section displays
serial number, installation date, ID, and firmware version. Another 3 sections
displays the settings of inverter functions. For more infromation about
these settings, please refer to 5.2.7 Install Settings, 5.2.8 Active/Reactive
power, and 5.2.9 FRT (Fault ride through).
5.2.6. General Settings
Users can set Language, Date and Time, and RS-485 communication
baud rate in this page.
Figure 5-7 Inverter information page
Figure 5-8 General settings page
Language
Date and Time
Baud Rate
►
ENT
or
S/N: RN11179CB0
Install: 30/04/2014
DSP 1.80 Red. 1.65
Comm. 1.65 ID: 002
ENT
or
AC connection:
Max. Power:
Dry Cont:
EPO:
3P4W
52500W
Insulation
Normal Close
Country:
Insulation:
Baud Rate:
Germany MV
1200k
19200bps
ENT
or
►
Grid Settings
Active Pwr Settings
React Pwr Settings
FRT Settings
Link to settings page but read only
44
Turn on PV inverter

Delta RPI M30A Specifications

General

Brand	Delta
Model	RPI M30A
Category	Inverter
Language	English