15
Quick installation guide for solar inverters RPI M6A M8A M10A EU V4 EN 5013221703 00 2017-11-16
8. Plug the AC plug into the AC connection on the inverter and
tighten.
9. Fasten the AC cable with a strain relief element.
10. If the inverter is connected to a grid without a neutral con-
ductor, the AC connection type must be changed using the
display to 3P3W after commissioning, see “AC connection
type”, page 23.
Connecting the mains (AC)
To Next Page
Loading...
Need help?
General
