31
Auto Preset
Use the auto preset function to program radio stations.
Setting items Setting details
Start
Start the auto preset
process.
TUNER
If an FM station cannot be preset automatically, select the desired
station by tuning it in manually, then preset it manually.
Preset Skip Default settings are underlined.
Set the preset memory block (from A to G) you do not want to display.
Setting items Setting details
Block A – Block G
Select a block to be skipped
from among preset blocks
(from A to G).
TUNER
ON : Display the selected preset memory block.
SKIP : Do not display the selected preset memory block.
Video Source Default settings are underlined.
Video of another input source is played back combined with the playing audio.
Setting items Setting details
Video Source
Source : Play the picture and sound of the input source.
DVD / CBL/SAT : Select video input source to view. This can be set for
individual input sources.
NOTE
It is not possible to select HDMI input signals.
Input Setup
Input Mode Default settings are underlined.
The input modes available for selection may vary depending on the input source.
Setting items Setting details
Input Mode
Set the audio input modes
for the different input
sources.
It is normally recommended
to set the audio input mode
to “Auto”.
Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input (OPTICAL/COAXIAL).
Analog : Play only signals from analog input.
•At time of purchase, the settings of the different input sources are as
shown below.
Input source Blu-ray DVD TV AUDIO CBL/SAT
Default setting HDMI Analog Digital Auto
Input source GAME AUX
Default setting HDMI Auto
•“Digital” can be set for the input source assigned to “OPTICAL” or
“COAXIAL” under “Input Assign” in the menu.
•If the input source is set to “Blu-ray”, “TV AUDIO” or “GAME”, it cannot
be set to “Analog”.
•If an input source is “TUNER”, the setting is fixed to “Analog”.
•When digital signals are properly input, the indicator lights on
the display. If the indicator does not light, check the digital input
connector assignment and the connections.
Decode Mode
Set the audio decode mode
for input source.
Blu-ray
DVD
TV AUDIO
CBL/SAT
GAME
AUX
Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
•This item can be set for input sources for which “OPTICAL” or
“COAXIAL” is assigned at “Input Assign” (vpage30).
•This item can be set for HDMI input sources (Blu-ray, GAME, CBL/SAT
or AUX).
•Normally set this mode to “Auto”. Set “PCM” and “DTS” when
inputting the corresponding input signal.
Source Level Default settings are underlined.
This function corrects the playback level of the selected input source’s audio input.
Make this setting if there are differences in the input volume levels between the different sources.
Setting items Setting details
Source Level
–12dB – +12dB (0dB)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
