106
Specifying the zone used with the
main remote control unit
When the ZONE SELECT button is pressed, only the set zone can be
operated with the remote control unit.
1
Press and hold ZONE/DEVICE Z
for at least 3 seconds.
The zone mode indicator flashes twice.
2
Press ZONE SELECT.
The zone mode indicator flashes twice.
3
Press 1 – 3 to set.
The zone mode indicator flashes twice.
[Settable items]
1 When only using “MAIN ZONE”
2 When using “MAIN ZONE” /
“ZONE2”
3 When using “MAIN ZONE” /
“ZONE2” / “ZONE3” (Default)
Resetting the remote control unit
Settings for the remote control unit are returned to the default values.
1
Press and hold ZONE/DEVICE Z
for at least 3 seconds.
The zone mode indicator flashes twice.
2
Press 9, 8 and 1, in that order.
J indicator flashes four times.
All the settings are restored to their
defaults.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
