70
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
How to make detailed settings
Setting items Detailed items Description Page
Audio Adjust Surr.Parameter Adjusts surround sound parameters.
76
Tone Adjusts the tonal quality of the sound.
78
Audyssey Settings Makes Audyssey MultEQ
®
, Audyssey Dynamic EQ
®
and Audyssey Dynamic
Volume
®
settings.
78
Manual EQ Uses the graphic equalizer to adjust the tone of each speaker.
79
RESTORER Uncompresses compressed sources and apply bass boost for richer sound.
80
Audio Delay Compensates for incorrect timing between video and audio.
80
Information Status Shows information about current settings.
81
Audio Signal Shows information about audio input signals.
81
HDMI Information Displays the HDMI input/output signals and HDMI monitor information.
81
Auto Surround Displays the settings stored for the auto surround mode.
81
Quick Select Displays the settings stored for the Quick Select function.
81
Preset Channel Shows information about tuner or network preset channels.
81
Setup Wizard Perform the installation, connection, and setup procedures to prepare the unit for
operation following guidance.
C 4
System Setup Speaker Setup Sets the speaker size and distance, the channel level, etc.
83
HDMI Setup Makes settings for HDMI video/audio output.
86
Audio Setup Makes settings for audio playback.
87
Network Setup Makes network settings.
88
ZONE2 Setup Makes settings for audio playback in a ZONE2 system.
91
Option Setup Makes various other settings.
92
Language Sets the language for display the menu on the TV screen.
94
Input Setup
Displayed items of the “Input
Setup” menu differs, depending on
the selected input source.
Auto Preset Uses the auto preset function to program radio stations. 96
Preset Skip Sets the preset memories that you do not want to display when tuning.
96
Preset Name Assigns name to a preset memory.
96
Input Assign Changes input connector assignment.
97
Video Makes the video settings.
98
Input Mode Sets the audio input mode and decode mode.
99
Rename Changes the display name for this source.
99
Source Level Adjusts the playback level of the audio input.
99
Playback Mode Makes settings for iPod, USB memory device or network source playback.
99
Still Picture Makes settings for still picture playback.
100
Audio Adjust
Information
Setup Wizard
System Setup
Input Setup
Surr.Parameter
Tone
AudysseySettings
Manual EQ
RESTORER
Audio Delay
Menu
Items that only need to be set
once
Set these for example upon purchase.
Once these items are set, there is
no need to set them again unless
the speaker layout or the connected
speakers have been changed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
