Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Settings
Items that only need to be set once
Set these for example upon purchase.
Once these items are set, there is no need to
set them again unless the speaker layout or the
connected speakers have been changed.
Setting items Detailed items Description Page
Audio / Video Adjust
Adjust various audio and
video parameters.
Audio Adjust Adjust various audio parameters. 67
Picture Adjust Adjust various video parameters. 72
Information
Show information about
receiver settings, input
signals, etc.
Status Shows information about current settings. 73
Audio Input Signal Shows information about audio input signals. 73
HDMI Information Shows information about HDMI input/output signals and monitor. 73
Auto Surround Mode Shows information about settings stored for the auto surround
mode.
73
Quick Select Shows information about settings stored for the Quick Select
function.
73
Preset Channel Shows information about preset channels. 73
Auto Setup
Makes the optimum speaker
settings and corrects for the
acoustic characteristics of
the room.
Audyssey™ Auto Setup Makes the optimum settings for the speakers being used
automatically.
27
Parameter Check Check Audyssey Auto Setup measurement results.
This item is only displayed after Audyssey Auto Setup procedure has
been performed.
32
Manual Setup
Use this to make various
types of detailed settings.
Speaker Setup Sets the speaker size and distance, the channel level, etc. 33
HDMI Setup Make settings for HDMI video/audio output. 35
Audio Setup Make settings for audio playback. 36
Network Setup Make network settings. 37
Zone Setup Make settings for audio playback in the multi-zone system. 39
Option Setup Make various other settings. 40
Input Setup
Use this to make settings
related to playing input
sources.
Auto Preset Use the auto preset function to program radio stations. 49
Preset Skip
Set the preset memories that you do not want to display when tuning.
49
Preset Name Assign name to a preset memory. 49
Input Assign Change input connector assignment. 44
Video Makes the video settings. 46
Input Mode Sets the audio input mode and decode mode. 47
Rename Change the display name for this source. 48
Source Level Adjust the playback level of the audio input. 48
Playback Mode (for iPod) Make settings for “iPod” playback. 48
Playback Mode (for NET/USB) Make settings for “NET/USB” playback. 49
Still Picture Make settings for still picture playback. 49
To Next Page
Loading...
Need help?
General
Weight and Dimensions
