Denon AVR-3310 User Manual


Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Adjusting the Volume of Groups of Speakers
(Fader Function)
This function lets you adjust (fade) the sound from all the front (Front
speaker / Front height speaker / Center speaker) or rear (Surround
speaker / Surround back speaker) speakers at once.
1
Use i to select “Fader”, then select the item to be
adjusting using o or p.
2
Use o p to adjust the volume of the speakers.
(o : front, p: rear)
The fader function does not affect the subwoofer.
The fader can be adjusted until the volume of the speaker adjusted
to the lowest value is –12 dB.
•
•
You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
Adjust the Volume of the Different Speakers
1
Press [CHANNEL LEVEL].
2
Use ui to select the speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use o p to adjust the volume.
In the case of a subwoofer, press o when it is at “–12 dB” will
change the setting to “OFF”.
b
When a headphone jack is inserted, the headphone channel level can
be adjusted.
With this function, you can set the AVR-3310 so that the power is
automatically switched to standby after the set amount of time has
passed.
This is convenient for playing sources while going to sleep.
When the sleep timer turns the power off in the MAIN ZONE, the
power also turns off in the ZONE2 and ZONE3.
To cancel the sleep timer
Press [SLEEP] to set “OFF”.
The “ ” indicator on the display turns off.
n
The sleep timer setting is canceled if the AVR-3310’s power is set to
standby or turned off.
Press [SLEEP] and display the time you want to set.
The “ ” indicator on the display lights.
The time switches as shown below each time [SLEEP] is pressed.•
OFF 120 min 90 min
60 min30 min
uio p
QUICK SELECT
ENTER
QUICK SELECT
uiop
ENTER
[CHANNEL
LEVEL]
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
Setting the Power to Standby After a
Certain Amount of Time
(Sleep Timer Function)
Adjust the Volume of the Speakers
Convenient Functions
[PARTY]
[SLEEP]
Front Rear
Playback

Denon AVR-3310 Specifications

General

Equalizer	Yes
Product color	Black
Frequency range	10 - 100000 Hz
Total Harmonic Distortion (THD)	0.05 %
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Connectivity technology	Wired
Headphone connectivity	3.5 mm
S-Video outputs quantity	2
Digital audio optical out	1
S-Video inputs quantity	7
Digital audio optical in	3
Dimensions (WxDxH)	434 x 414 x 171 mm
HDMI ports quantity	5
Power consumption (standby)	1 W
Power consumption (typical)	780 W

Weight and Dimensions

Weight	12900 g