Denon AVR-3310 User Manual


Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Tuning in Radio Stations
1
Set [DEVICE SELECT 1] to “MAIN/TV” and [DEVICE
SELECT 2] to “MAIN”.
2
Press [SOURCE SELECT] to display the GUI Source
Select menu, then select “ ” (vpage 26).
3
Press [BAND] to select “FM” or “AM”.
4
Tune in the desired broadcast station.
q To tune in automatically (Auto Tuning)
Press [MODE] to light the “AUTO” indicator on the display, then
use [TUNING] to select the station you want to hear.
w To tune in manually (Manual Tuning)
Press [MODE] to turn off the display’s “AUTO” indicator, then
use [TUNING] to select the station you want to hear.
5
Adjust the items below.
Adjusting the master volume (vpage 62)
Selecting the surround mode (vpage 64)
Adjusting the Sound and Picture Quality
(vpage 67)
n
n
n
If the desired station cannot be tuned in with auto tuning, tune it in
manually.
When tuning in stations manually, press and hold [TUNING] to
change frequencies continuously.
The time (default : 30 sec) for which the GUI menu is displayed can
be set “GUI” – “Tuner” (vpage 41). Press uio p to return to
the original screen.
•
•
•
Listening to Preset Stations
You can also operate via the main unit. In this case, perform the
following operations.
Press <TUNING PRESET>, then turn <SOURCE SELECT> to select the
preset radio station.
1
Press [SHIFT] to select the memory block (A to G).
2
Press [CHANNEL] to select the desired preset preset
channel.
Presetting Radio Stations (Preset Memory)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
Press [MEMORY].
3
Press [SHIFT] to select the block in which the channel
is to be preset, then press [CHANNEL] to select the
preset number.
4
Press [MEMORY] again to complete the setting.
To preset other stations, repeat steps 1 to 4.
Stations can be preset automatically at “Auto Preset” (vpage
49).
•
•
NOTE
Preset stations are erased by overwriting them.
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
Playback
Listening to FM/AM Broadcasts
ui<TUNING PRESET>
<SOURCE SELECT>
[DEVICE
SELECT 1]
[DEVICE
SELECT 2]
[SOURCE
SELECT]
[SHIFT]
[MEMORY]
[TUNER]
[TUNING]
[CHANNEL]
ui
[TUNING]
[MODE]
[TUNER]
[BAND]
Front Rear

Denon AVR-3310 Specifications

General

Equalizer	Yes
Product color	Black
Frequency range	10 - 100000 Hz
Total Harmonic Distortion (THD)	0.05 %
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Connectivity technology	Wired
Headphone connectivity	3.5 mm
S-Video outputs quantity	2
Digital audio optical out	1
S-Video inputs quantity	7
Digital audio optical in	3
Dimensions (WxDxH)	434 x 414 x 171 mm
HDMI ports quantity	5
Power consumption (standby)	1 W
Power consumption (typical)	780 W

Weight and Dimensions

Weight	12900 g