Denon AVR-4208 User Manual

31
ENGLISH
1
Select the function to which the component
you want to play is connected.
EX:
2
Select the Dolby Surround Pro Logic II mode.
Dolby Surround Pro Logic
II
mode
INPUT SELECTOR
(Main unit) (Remote control unit)
3
Play a program source with the mark.
• For operating instructions, refer to the manuals of the respective components.
Light
(Main unit) (Remote control unit)
DOLBY / DTS
Select the DOLBY
PRO LOGIC
II mode
using the SELECT
buttons.
The surround mode
switches when the
SURROUND MODE
button is pressed.
Select the DOLBY
PRO LOGIC
II mode.
• The Dolby Pro Logic indicator lights.
2 64, 51
1
2
4, 6
5
4
Select the surround parameter mode.
CINEMA
/ MUSIC
(Main unit) (Remote control unit)
5
Select the optimum mode for the source.
CINEMA
/ MUSIC
BAND MODE
TUNING
TUNING
(Main unit) (Remote control unit)
DOLBY PL II CINEMA
DOLBY PL
II MUSIC DOLBY PL II EMULATION
6
Set the surround parameters according to the mode.
SURROUND
PARAMETER
(Main unit) (Remote control unit)
DOLBY PL II CINEMA
DOLBY PL
II MUSIC DOLBY PL II EMULATION
• The mode switches as shown below each time the button is pressed.
7
Set the various surround parameters.
Stop pressing buttons once you have completed
setting the surround parameters. After several
seconds the normal display reappears and the
settings you have made are automatically set.
• CINEMA EQ setting
• PANORAMA/DIMENSION/CENTER WIDTH
setting
• DEFAULT setting
NOTE:
• When making parameter settings, the display
will return to the regular condition several
seconds after the last button was pressed and
the setting will be completed.
Surround parameters e
Pro Logic II Mode:
The Cinema mode is for use with stereo television
shows and all programs encoded Dolby Surround.
The Music mode is recommended as the standard
mode for autosound music systems (no video),
and is optional for A/V systems.
The Pro Logic Emulation mode offers the same
robust surround processing as original Pro Logic in
case the source contents is not of optimum quality.
Select one of the modes (“Cinema”, “Music” or
“EML”).
Panorama Control:
This mode extends the front stereo image to
include the surround speakers for an exciting
“wraparound” effect with side wall imaging.
Select “OFF” or “ON”.
Dimension Control:
This control gradually adjust the soundfield either
towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be
heard only from the center speaker; only from the
left/right speakers as a phantom image; or from all
three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.

Denon AVR-4208 Specifications

General

Brand	Denon
Model	AVR-4208
Category	Amplifier
Language	English