9
ENGLISH
Remote control unit
• For details on the functions of these parts, refer to the pages given in parentheses ( ).
SYSTEM CALL buttons................(20)
Input mode selector buttons .......(23)
Surround mode buttons...............(23)
TEST TONE button ......................(27)
Speaker selector button...............(24)
System buttons............................(17)
ENTER/system button .................(10)
Tuner system/
system button..............................(10)
OSD/DISPLAY/
system button..............................(24)
System setup/
system button..............................(10)
Master volume control
buttons.........................................(23)
Mode selector buttons ................(17)
Power button ...............................(18)
SURR. PARA. /MENU button.......(30)
RETURN/MEMORY/system
button...........................................(19)
MUTING button ...........................(24)
Input source selector
buttons.........................................(23)
BACKLIGHT button
Remote control signal
transmitter ...................................(17)
7
SETTING UP THE SYSTEM
• Once all connections with other AV components have been completed as described in “CONNECTIONS”
(see pages 4 to 8), make the various settings described below on the monitor screen using the AVC A11SR’s
on-screen display function.
These settings are required to set up the listening room’s AV system centered around the AVC-A11SR.
• Use the following buttons to set up the system:
SYSTEM SETUP button
Press this to display the system setup menu.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
CURSOR buttons
F and G: Use these to move the cursors (F and G) to
the left and right on the screen.
D and H: Use these to move the cursors (D and H) to
the up and down on the screen.
• System setup items and default values (set upon shipment from the factory)
System setup Default settings
q
w
t
y
u
i
Speaker
Configuration
Surround
Speaker Setting
Subwoofer
mode
SB CH Auto
Flag Detect
Channel Level
Subwoofer
Peak Limit Lev
Digital In
Assignment
On Screen
Display
Input the combination of speakers in your system and their
corresponding sizes (Small for regular speakers, Large for full-
size, full-range) to automatically set the composition of the
signals output from the speakers and the frequency response.
Use this function when using multiple surround
speaker combinations for more ideal surround
sound. Once the combinations of surround
speakers to be used for the different surround
modes are preset, the surround speakers are
selected automatically according to the surround
mode.
This selects the subwoofer speaker for playing deep bass
signals.
Set the method of playing the surround backchannel for digital
signals.
This adjusts the volume of the signals output from the speakers
and subwoofer for the different channels in order to obtain
optimum effects.
This parameter is for detecting the maximum level of the low
bass signals output from the subwoofer channel in order to
protect the subwoofer from damage and prevent unpleasant
distorted sounds from being produced.
This assigns the digital input jacks for the different
input sources.
This sets whether or not to display the on-screen display that
appears on the monitor screen when the controls on the remote
control unit or main unit are operated (from MONITOR 1 outputs
only).
Surround
mode
Surround
speaker
Input
source
Digital
Inputs
Front Sp.
Small
Center Sp. Surround Sp.Sub Woofer
Small SmallYes
DOLBY/
DTS
SURROUND
THX/
THX 5.1
WIDE
SCREEN
5CH/7CH
STEREO
DSP
SIMULATION
EXT. IN
——
AAAAAA——
LFE —THX—
Front L & R Center Surround L & RSub Woofer
3.6 m (12 ft) 3.6 m (12 ft) 3.0 m (10 ft)3.6 m (12 ft)
Front L
Center
Front R
Surround
Back R
Surround
L
Subwoofer
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
Peak Limitter = OFF
CD DVD VDP TV
DBS/
SAT
VCR-1 VCR-2
V. AUX
COAXIAL
1
COAXIAL
2
COAXIAL
3
OPTICAL
1
OPTICAL
2
OPTICAL
3
OPTICAL
4
OFF
On Screen Display = ON
Surround Back Sp.
Small / 2spkrs
Auto Flag Detect Mode = ON / Non-Flag Source SBch Output = THX Surround EX DTS ES
e
Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and subwoofer
according to the listening position.
SBL & SBR
3.0 m (10 ft)
r
Multi Zone Vol.
Level
This sets the output level for the multi-zone output jacks. Variable
Surround
Back L
0 dB
Surround
R
0 dB
TAPE
OPTICAL
5
VCR-3
OFF
TUNER
OFF
—
—
Crossover
Frequency
Set the frequency (Hz) below which the bass sound of the
various speakers is to be output from the subwoofer.
FIXED —THX—
To Next Page
Loading...
Need help?
General
