26
8.13. Sales demonstration lock function
This function prevents discs from being lost when the unit is used for sales demonstrations by disabling the disc eject function.
"LOCKED" is displayed on the unit, and ordinary operation is disabled.
8.13.1. Setting
The sales demonstration lock is set by simultaneously pressing STOP button on the player and POWER button on the remote
control unit.
8.13.2. Cancellation
The lock can be cancelled by the same procedure as used in setting. ("UNLOCKED" is displayed on cancellation. Disconnecting
the power cable from power outlet does not cancel the lock.)
8.14. Service Precautions
8.14.1. Recovery after the dvd player is repaired
8.14.2. Firmware version-up of the DVD player
8.15. Handling After Completing Repairs
Use the following procedure after completing repairs.
8.15.1. Method
Confirm that the power is turned on:
1. Press the "OPEN/CLOSE" button to close the tray.
2. Press the "POWER" button to turn off the power.
3. Disconnect the power plug from the outlet.
8.15.2. Precautions
Do not disconnect the power plug from the outlet with the tray still open, then close the tray manually.
9
To Next Page
Loading...
Need help?
General
