Digi Connect ME Hardware Reference

Revision L
78
Change Log
APPENDIX E
The following changes have been made since the last revision of this document.
Note: As of September 2007, the document number for this Hardware Reference Manual
changed from 90000631 to 90000897.
Revision L
 In Appendix A, Module Specifications, in Recommended PCB Layout, updated drawings and
added links to additional drawings on Digi Connect ME and Wi-ME product pages.
 Various formatting and pagination changes.
Revision K
 Added additional signal description information to the Module Connector Pin Assignment
table in Chapter 2.
 Updated the Digi Connect ME and Wi-ME PCB layout image in Appendix A.
 Updated the Power and Device Interface Connector image and table in Chapter 1.
 Updated the Embedded Module Connector Pin Orientation image in Chapter 2.
 Updated the Power and Device Interface Connector Pin Assignment table in Chapter 2.
 Updated the Development Board LED Description table in Chapter 2.
 Updated the Module Pinout key and table in Chapter 3.
 Added Connect Wi-ME and Wi-ME 9210 hard reset information to Chapter 3.
 Added the Digi Connect ME “Top Dimensions” figure to Appendix A.

Digi Connect ME Specifications

General

Brand	Digi
Model	Connect ME
Category	Network Hardware
Language	English