Section Four - Other Functions
Drum Machine
The RP150 includes a built-in drum machine loaded with 65 useful patterns including a metronome
setting that are easily accessible at the touch of a button (the Drums button, specifically). Press-
ing the Drums button will enable the drum machine and start playback of the selected drum pat-
tern (except when in Store or Bypass mode). When the Drums row is selected (using the Edit
buttons), Knob 1 scrolls through the first patterns for each drum style, Knob 2 scrolls through all
the drum patterns, Knob 3 adjusts the Tempo of the drum pattern and Knob 4 adjusts the Level
of the drum pattern. Press the Drums button again to stop playback of the drum loop.
Drum Pattern List
Beats () (8th beat) Jazz ()
Beats () (16th beat) Hip Hop ()
Rock () World ()
Hard Rock () Metronome () (4/4)
Metal () Metronome () (3/4)
Blues () Metronome () (5/8)
Groove () Metronome () (7/8)
Country () Metronome ()
Optional Passive Volume/Continuous Control Pedal
Connect a passive volume or continuous control pedal to the RP150’s Control In jack to control
the RP150’s Volume, Wah, or Whammy™ in real time with your foot. Turn on the Wah or Wham-
my to control it with the optional pedal, or turn on both the Wah and the Whammy to control
both simultaneously. When a pedal is connected and neither the Wah nor the Whammy effects are
activated, the pedal controls the RP150’s volume by default.
Factory Reset
This function resets the RP150 to its original factory settings. This procedure erases all custom
User presets.
ATTENTION: Performing this function will erase all user-programmed data. All
such data will be lost forever! Be sure you want to erase the memory and start fresh
before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press and hold the
Store button while powering up the RP150.
2. When the display prompts you with , release the Store button, which is now flashing.
3. Press and hold the flashing Store button for 3 seconds until appears in the display and
release. The Factory Reset procedure takes approximately 15 seconds.
To Next Page
Loading...
Need help?
General
