21
This RP-6’s Pitch Shifting effect gives you a shifted signal from 0 to 24
semi-tones above or below the pitch of the input signal.
Shift............................Sets the interval between the original note and
the pitch shifted note. Variable from -24 to 24
Detune.......................Determines the amount of detuning applied to
the shifted note. Variable from -99 to 99.
The RP-6’s pitch bending effect allows you to smoothly shift between
two preset pitch intervals using the CC Pedal.
Type...........................Selects the function of the Whammy™ Module.
There are 16 functions available in regular
Whammy Modules. They are as follows:
1= Shallow Detune 9=Major 2nd Up to Major 3rd Up
2=Deep Detune 10=Minor 3rd Up to Major 3rd Up
3=1 Octave Up 11=Major 3rd Up to 4th Up
4=Up 2 Octaves 12=4th Up to 5th Up
5=Down 2nd 13=5th Up to 6th Up
6=Down 1 Octave 14=5th Up to Major 7th Up
7=Down 2 Octaves 15=4th Down to Minor 3rd Down
8=Down 6 Octaves 16=5th Down to 4th Down
Position.........................The POSITION Parameter reflects the current
setting of the Whammy™ effect. This
Parameter should be linked to the RP-6’s CC
pedal. As Position is modified, the pitch of the
original note will change in intervals according
to the setting of the WHAMMY TYPE. Ranges
from 0 to 100.
To Next Page
Loading...
Need help?
General
