22
Delay times 1 & 2 can be programmed independently. However,
On/Off, Type, Level, and Feedback will program the same for BOTH
Delays 1 & 2. For example, if you choose to program your Level to 50,
both Delays 1 & 2 will be 50. Delay Parameters are as follows:
On / Off..........................Turns the Effect on and off.
Type ..............................Determines the type of delay. Type 1 is a
mono delay, Types 2 through 4 are two tap
mono delays, and Types 5 through 7 are two
tap stereo delays (see chart below for further
information).
Level..............................Controls the level of the delay in both Delay1
and Delay 2. Ranges from 0 to 100.
Delays 1 & 2..................The available delay time ranges are 0 (no
delay) to 800 milliseconds.
Feedback ......................The amount of time it takes for the Reverb to
fade to inaudibility. Ranges from 0 to 99.
Type:
1
2
3
4
5
6
7
Left Output:
Delay 1
Delays 1 & 2
Delays 1 & 2
Delays 1 & 2
Delay 1
Delay 1
Delay 1
Right Output:
Delay 1
Delays 1 & 2
Delays 1 & 2
Delays 1 & 2
Delay 2
Delay 2
Delay 2
Feedback Source:
Delay 1
Delay 1
Delay 2
Delays 1 & 2
Delay 1
Delay 2
Delays 1 & 2
To Next Page
Loading...
Need help?
General
