18
Resonance - Enhances deeper voices by adding low and mid-frequency filters.
Clarity - Enhances all voices by adding mid-frequency filters.
Shine - Adds extra sheen to voices by emphasizing high frequencies.
Press an ENHANCE button to select it. Turn the ENHANCE knob clockwise to increase the
amount of filtering applied to your voice, or turn it counter-clockwise to reduce the amount of
filtering.
Reverb Knob and Buttons
Using reverb on an incoming voice gives the listener a sense that the material is being performed
in an actual room or hall. It is this similarity to actual acoustic spaces that makes reverberation a
useful tool in live music. The Vocalist
®
Live 2 features three reverbs to add depth and warmth to
your vocal performance.
Studio - simulates a studio plate reverb with fairly short decay and lots of diffusion.
Room - simulates a mid-sized room with about one second of decay.
Hall - simulates a large performance hall with several seconds of decay and high diffusion.
Press a REVERB button to select it. Turn the REVERB knob clockwise to increase the amount
of reverb, or turn it counter-clockwise to reduce the amount of reverb.
Effects Footswitch
This footswitch turns the Compressor, Reverb, and Enhance effects on or off. While each of these
three effects can be turned on or off and adjusted individually, the EFFECTS footswitch activates
or deactivates all of them simultaneously.
When the LED above the EFFECTS footswitch is illuminated, the effects are on. When the LED
is turned off, the effects are turned off.
To Next Page
Loading...
Need help?
General
