21
Setting Levels on the Vocalist
®
Live 2
Setting the Vocal Level
It is recommended you set your vocal level by adjusting the Mic/Line Input Level knob on the
rear panel so that the Vocal Signal LED is amber during loud vocal sections and only briefly
turns red on the very loudest vocal sections. The Vocalist
®
Live 2 will normally prevent the vocal
harmonies from clipping, even when the LED is red, but for optimum voice quality the LED should
turn red only briefly or not at all.
Setting the Guitar Level
Ideally the Guitar Signal LED should be green or amber while playing. There is no guitar input
level control, but most electric guitars send their signal at a level appropriate for the Vocalist Live
2. If you have a volume control on your guitar (for example, an acoustic guitar with a pre-amp built
in), you should adjust the volume so that the Guitar Signal LED is green or amber most of the
time while playing.
To Next Page
Loading...
Need help?
General
