5
1.1 QUICK START GUIDE
7KHIROORZLQJ4XLFN6WDUW*XLGHSURYLGHVWKHQHFHVVDU\VWHSVWRLQVWDOODQGRSHUDWHWKHZHDWKHU
station, and upload to the Internet, along with references to the pertinent sections.
Step Description Section
1 Power up the 7-in-1 sensor array 3.1.3
2 Power up the display console and pair with sensor array 3.4
3 Manually set date and time (This part is unnecessary if the weather
station is connected to PWL later)
4.4.1
4 Reset the rain to zero 4.3.10.2
5 Create account and register weather station at PWL 5
6 Connect weather station to WiFi 6.1, 6.2, 6.3
2. PRE INSTALLATION
2.1 CHECKOUT
Before permanently install your weather station, we recommend the user to operate the weather
station at a location which is easy to access to. This will allow you to get familiar with the
weather station functions and calibration procedures, to ensure proper operation before installing
it permanently.
2.2 SITE SELECTION
Before installing the sensor array, please consider the followings;
1. 5DLQJDXJHPXVWEHFOHDQHYHU\IHZPRQWKV
2. %DWWHULHVPXVWEHFKDQJHGHYHU\WR\HDUV
3. $YRLGUDGLDQWKHDWUHÀHFWHGIURPDQ\DGMDFHQWEXLOGLQJVDQGVWUXFWXUHV,GHDOO\WKHVHQVRU
array should be installed at 1.5m (5’) from any building, structure, ground or roof top.
4. Choose an area of open space in direct sunlight without any obstruction of rain, wind, and
sunlight.
5. Transmission range between sensor array and display console could reach a distance of
PRUIHHWDWOLQHRIVLJKWSURYLGLQJWKHUHDUHQRLQWHUIHULQJREVWDFOHVLQEHWZHHQRU
QHDUE\VXFKDVWUHHVWRZHUVRUKLJKYROWDJHOLQH&KHFNWKHUHFHSWLRQVLJQDOTXDOLW\WRHQVXUH
good reception.
6. Household appliance such as fridge, lighting, dimmers may pose Electro-magnetic
LQWHUIHUHQFH(0,ZKLOH5DGLR)UHTXHQF\,QWHUIHUHQFH5),IURPGHYLFHVRSHUDWLQJLQWKH
same frequency range may cause signal intermittent. Choose a location at least 1-2 meter
(3-5 feet) away from these interference sources to ensure best reception.
To Next Page
Loading...
Need help?
General
