7
3.1.2 INSTALL RAIN GAUGE FUNNEL
Install the rain gauge funnel and rotate clockwise to lock the funnel to the sensor array
Step 2
Step 1
Lock
JURRYHV
3.1.3 INSTALL BATTERIES
Unscrew the battery door at bottom of unit. Insert the 3 AA batteries (non-rechargeable)
according to the +/- polarity indicated. The red LED indicator on the back of the sensor array will
WXUQRQDQGWKHQEHJLQÀDVKLQJHYHU\VHFRQGV
NOTE:
We recommend using non-rechargeable Lithium AA batteries for cold weather climate, but
QRUPDOO\$ONDOLQHEDWWHULHVDUHVXI¿FLHQWIRUXVHLQPRVWZHDWKHUFRQGLWLRQ
3.1.4 INSTALL MOUNTING POLE
1. 6WLFNWKHUXEEHUSDGVSURYLGHGRQWRWKHLQQHUVLGHVRIWKHPRXQWLQJSDUW
2. Insert the 2 screws into the sensor array mounting base and hand tighten the screws
3. 3ODFHWKHVHQVRUDUUD\RYHUWKHPRXQWLQJSROHDQGDOLJQWKHVHQVRUDUUD\WR1RUWKGLUHFWLRQ
4. 7LJKWHQWKHVFUHZVWR¿WWKHVL]HRI\RXUPRXQWLQJSROH
Add rubber pad
before mounting
on pole