Installation of microSD Memory Card — (Sold Separately)
Hold card up-side-down and insert until you feel a click.
How to INSERT the micoSD Card
LIMITLESS 4S has a microSD card reader, which can be found on the side of the drone towards the front.
If looking directly at the drone’s camera, the card reader will be located on the right-hand-side as shown in
the figure below.
The microSD card reader in LIMITLESS 5 allows a
MAXIMUM Capacity of 128GB (or less). This means
any HIGH SPEED card rated “U3 V30” that has a storage capacity of 128gb or less will work. A high
speed card is needed because LIMITLESS 5 records high resolution photos & videos in 4K Ultra-HD,
therefore, you need to use a card that has FAST enough Read & Write speeds. Card must have a
MINIMUM Write Speed of 30m/s (meaing your card should have the label U3 V30 written on it).
We designed a HIGH SPEED 128GB microSD card specifically for use in our LIMITLESS 5 drone, which
can be purchased directly from our website www.DroneCloneXperts.com. Simply hover your mouse
over the accessories tab and you’ll see the 128gb microSd card as well as all the other accessories we
have available for this drone such as, Spare Batteries, Spare Propellers, Payload Release Attachment for
Drone Fishing, Drone Landing Pads, Quick Charging Power Banks, Charging Cords, and more.
--
-5-
To Next Page
Loading...
Need help?
General
