DS5_en_Chap08_info-pratiques_ed02-2015
Repair procedure
F Switch off the ignition.
F Uncoil the white pipe G fully.
F Unscrew the cap from the white pipe.
F Connect the white pipe to the valve of the
tyre to be repaired.
F Connect the compressor's electric plug to
the vehicle's 12 V socket.
F Start the vehicle and leave the engine
running.
Take care, this product is harmful
(e.g. ethylene-glycol, colophony...) if
swallowed and causes irritation to the eyes.
Keep this product out of the reach of
children.
Avoid removing any foreign bodies
which have penetrated into the tyre.
1. Sealing
F Turn the selector A to the "sealant"
position.
F Check that the switch B is in
position "O".
The vehicle's electric system allows the
connection of a compressor for long
enough to inflate a tyre after a puncture
repair or for inflating a small inflatable
accessory.
To Next Page
Loading...
Need help?
General
