DS5_en_Chap10_caracteristiques_ed02-2015
Identication markings
Various visible markings for the identification of your vehicle.
A. Vehicle Identification Number (VIN)
under the bonnet.
This number is engraved on the bodywork
near the damper support.
The tyre pressures must be checked
when the tyres are cold, at least once
a month.
If the tyre pressures are too low, this
increases fuel consumption.
B. Vehicle identification Number (VIN) on
the windscreen lower cross member.
This number is indicated on a self-adhesive
label which is visible through the windscreen.
C. Manufacturer's label.
The VIN is indicated on a self-destroying
label affixed to the door aperture, on the
passenger's side.
D. Tyre/paint label.
This label is affixed to the centre pillar, on
the driver's side.
It bears the following information:
- the tyre inflation pressures, laden and
unladen,
- the tyre sizes,
- the inflation pressure of the spare wheel,
- the paint colour code.
The rear quarter light cannot be etched
as it is made of polycarbonate material.
To Next Page
Loading...
Need help?
General
