To Next Page

To Previous Page

INM MTL SUM5 Rev 7

DRAFT - 09 June 2021 DRAFT - 09 June 2021

17.16 Reash Pulse Length

As indicated above the group relays can have a reash feature enabled which interrupts the output

each time a new alarm occurs within the group. The reash pulse length can be set in tenths of a

second to suit individual applications.

17.17 Alternative Functions for any Relay

The drop-down menu provided next to the “Assignment Field” of each relay allows the user to set

any of the Relays to:-

• Any group (Group-1 to Group-30).

• Any group with Reash enabled (Group-1 to Group-30).

• Pushbutton Follower where the relay will faithfully follow the operation of any one of the

following Pushbutton functions:- Lamp Test, Mute, Ack, Reset, 1st Reset or System Test.

• All faults Relay where the relay activates if any fault is detected within the Annunciator.

• Field Contact fault where the relay activates when the signal supply is lost which can be

used to ag 3rd Party devices.

Eaton Crouse-hinds series User Manual

Other manuals for Eaton Crouse-hinds series