Eaton KK650 User Manual

42
INM MTL SUM5 Rev 7
DRAFT - 09 June 2021 DRAFT - 09 June 2021
17.5.4 Diagnostics
Once the SmartAlarm has been connected to a suitable PC/Laptop via the Eaton supplied
USB Cable the user is able to select Diagnostics to check the dynamic status of the
SmartAlarm.
17.5.5 Set Structure
Please consult factory before modifying the structure of a supplied Annunciator.
17.5.6 Scan Unit
This allows the user to identify the address, card type, software version and software
revision number for the cards within the SmartAlarm. This will aid fault nding or spare
parts identication.
17.5.7 Test Tools
Production use only.
17.5.8 General Tab
The elds listed under the “General” tab allow the user to uniquely identify each Alarm
Annunciator System to aid with the storage and retrieval of conguration data.
The user can update any of the elds within the software but the changes will only be
saved after the “Conrm Settings” control button is pressed using a left mouse click. Any
changes will need to be sent to the annunciator via the Tools menu “Send Settings”.

Eaton KK650 Specifications

General

Brand	Eaton
Model	KK650
Category	Lighting Equipment
Language	English