Eaton SPD Series User Manual

Effective December 2020
10 Eaton www.eaton.com
Eaton SPD Series for mounting external
to electrical distribution equipment
Instruction Manual IM01005031E - rev. 7
•
Red LEDs: Illumination indicates a loss of protection, and that
one or more protective devices are now inactive and unavail-
able for that phase. Red LEDs also indicate neutral to ground
protection on units with a neutral wire. Red LEDs do not indi-
cate on/off status of power.
Standard feature package
The Eaton SPD Series Standard feature package display is
shown in Figure 15.
Figure 15. Standard feature package display
The Standard feature package has the following features:
•
All features of the Basic feature package.
•
One form C relay contact rated at 150Vac @ 0.46A or 30Vdc
@1A.
•
Normal operating conditions. N.O. = OPEN. N.C =
CLOSED.
•
Loss of protection on any phase or loss of power. N.O. =
CLOSED. N.C. = OPEN.
•
Audible alarm with alarm silence pushbutton.
•
EMI/RFI filtering.
Standard with Surge Counter feature package
The Eaton SPD Series Standard with Surge Counter feature
package display is shown in Figure 16.
Figure 16. Standard with Surge Counter feature package
display
The Standard with Surge Counter feature package has the
following features:
•
All features of the Standard feature package.
•
LCD screen that displays surge count.
•
Reset button to RESET the Surge Counter to zero.
Power Xpert SPD feature package
The Eaton Power Xpert SPD feature package display is shown in
Figure 17.
Figure 17. Power Xpert SPD display
The Power Xpert SPD has the following features:
•
All features of the Standard with Surge Counter feature pack-
age plus advanced monitoring and communication.
•
Display upgraded to a 20x4 character liquid crystal display
(LCD). LCD technology is readable above -20°C, however
surge protection is fully functional to -40°C.
•
Power Xpert Gateway 900 (PXG900) with firmware version
4.6.4 and higher are Modbus TCP supported and configurable
with the ability to receive email notifications. Modbus TCP/IP
must be enabled on the PX-SPD prior to use.
•
LCD main menu options include the following:
• SPD status - surge event logs
• Event logs – all events, including phase protection percent-
age, phase loss, alarm status, power on/off and low, med
and high level surges
• Settings - includes device setup, changing the password
and the option of giving the device a new name.
• Identification - information on the device
•
One form C relay contact rated at 150Vac at 0.46A, 30Vdc
at 1A. Normal operating conditions. N.O. = OPEN. N.C =
CLOSED. Loss of protection on any phase or loss of power.
N.O. = CLOSED. N.C. = OPEN.
•
Audible alarm with push any button to silence.
•
EMI/RFI filtering.
•
Remote monitoring via web UI, Modbus TCP/IP or BACnet/IP
protocols. Modbus, BACnet and HTTP are initially disabled for
cybersecurity purposes.
•
Phase surge event counters.
•
Time/date stamp event logs.
•
Green LEDs: Illumination indicates the phase is fully protect-
ed (100%), and operating normally, with all protection active
and available. Green LEDs also indicate neutral to ground
protection on units with a neutral wire. Green LEDs do not
indicate on/off status of power.
•
Yellow LEDs: Illumination indicates a partial loss of protection
(>1% to 99%), and that one or more protective devices are
now inactive and unavailable for that phase.
•
Red LEDs: Illumination indicates a total loss of protection
(0%), and that one or more protective devices are now inac-
tive and unavailable for that phase. Red LEDs do not indicate
on/off status of power.

Eaton SPD Series Specifications

General

Brand	Eaton
Model	SPD Series
Category	Surge Protector
Language	English