Chengdu Ebyte Electronic Technology Co.,Ltd.
E18-DTU(Z27-ETH) User Manual
Copyright ©2023
，成都亿佰特电子科技有限公司
The main interface pops up on the webpage, and you can query and set relevant parameters；
Click Submit to save the configuration parameters
；
The progress bar prompts the configuration progress, please do not refresh the web page again after the configuration is completed
(refresh the web page to enter the configuration mode again, you can enter the communication mode by restarting the device or
submitting it again)。
3.8.2 Factory reset
Press and hold the device's Reload button until all LEDs are fully lit to release the button
。
3.8.3 AT command configuration
Ethernet parameter AT command configuration: The relevant parameter query and modification of the device can be completed through
the AT command configuration. For specific AT commands, please refer to "NA11x&NB114&NS1&NT1-AT Command Set"
。
3.8.4 Random native port
TCP clients, UDP clients, HTTP clients, and MQTT clients can configure the native port to 0 (use random native ports), and the server
mode cannot use random ports, otherwise the client cannot establish a connection correctly
。
To Next Page
Loading...
Need help?
General
