12
LIVA Z MINI PC USER MANUAL
Chapter 2
The Standard Configuration
A standard configuration has already been set in the Setup Utility.
However, we recommend that you read this chapter in case you need
to make any changes in the future.
This Setup Utility should be used:
• when changing the system configuration
• when a configuration error is detected and you are
prompted to make changes to the Setup Utility
• when trying to resolve IRQ conflicts
• when making changes to the Power Management
configuration
• when changing the password or making other changes
to the Security Setup
Press DEL to enter SETUP
Entering the Setup Utility
When you power on the system, BIOS enters the Power-On Self Test
(POST) routines. POST is a series of built-in diagnostics performed
by the BIOS. After the POST routines are completed, the following
message appears:
Press the delete key to access BIOS Setup Utility.