EasyManuals Logo
Home>EGO>Lawn Mower>Power+ ZT4200L

EGO Power+ ZT4200L User Manual

EGO Power+ ZT4200L
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200L/ZT4200L-FC30
OPERATION
WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a
second is sufcient to inict serious injury.
WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can result in serious personal injury.
APPLICATION
You may use this product for purpose listed below:
Mowing your lawn.
FINAL PREPARATION
CHECK THE TIRE PRESSURE
Check the air pressure in all tires before use. Improper air pressure will affect handling, steering response, traction, tire
life, level cutting, and operator comfort. Be sure tires are inated to the pressure shown below.
NOTICE: Tire pressure should only be measured or adjusted when tires are cold.
Recommended Pressure
Front Wheel Rear Wheel
32 PSI (222.1 kPa) 7 PSI (48.3 kPa)
WARNING: Check the tire pressure carefully while inating. Too much air in the tire could cause the tire to burst,
causing serious personal injury.
VERIFY MOWER CONDITION
Inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts, caps, etc. Tighten securely all
fasteners and caps and do not operate this product until any missing or damaged parts are replaced.
TEST THE SAFETY INTERLOCK SYSTEM (Fig. 14 )
The mower incorporates a separate seat switch that will stop the
drive motors and deck motors when the operator is unseated for
any reason while the mower is operating. This is a safety feature
designed to prevent runaway or accidental entanglement. Test the
system to be sure it is working correctly.
1. Position the mower on a level surface.
2. The operator must be on the seat when testing the seat switch.
3. Release the parking brake pedal.
4. Insert the safety key into the mower and press the start/stop
button for 3 seconds to illuminate the LCD screen.
5. Pull the PTO switch upward to engage the blade motors.
6. Slowly raise yourself off of the seat, but do not get off the
mower. The deck blade system should stop.
14

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EGO Power+ ZT4200L and is the answer not in the manual?

EGO Power+ ZT4200L Specifications

General IconGeneral
BrandEGO
ModelPower+ ZT4200L
CategoryLawn Mower
LanguageEnglish

Related product manuals