●
Preference Settings
The monitor’s settings can be congured to suit the usage environment or personal preference.
Function Setting Value Description
Power Save On
O
The monitor can be set to enter power saving mode according
to the state of the PC.
The monitor changes to power saving mode about 15 seconds
after signal input ceases to be detected.
When the monitor has shifted to power saving mode, images
are not displayed on the screen and audio is not output.
• How to exit power saving mode
- Press the operation switches (excluding
) on the front
of the monitor
- The monitor automatically exits power saving mode when
the monitor receives input
Note
• At the time of shifting to power saving mode, a message
that indicates the transition is displayed 5 seconds in
advance.
• For PbyP display, if there is no signal input for all connected
PCs, the monitor shifts to power saving mode.
• When not using the monitor, you can turn o the main power
supply or disconnect the power plug so that the power is cut
completely.
• When “Compatibility Mode” (page 34) is set to “On”,
even if the monitor shifts to power saving mode, devices
connected to the USB downstream port are operational.
Therefore, power consumption of the monitor varies with
connected devices even in power saving mode.
Power Indicator On
O
The power indicator (white) can be turned o in normal
operation mode.
23
Chapter 3 Advanced Adjustment / Setting
To Next Page
Loading...
Need help?
General
