Emerson AMS Wireless Vibration Monitor User Manual

2.6 Configuration options
2.6.1 Measurement parameter units
The table below shows the measurement parameters and units that can be configured for
each parameter.
Table 2-1: Measurement parameter units
Parameter Units
Acceleration m/s
Velocity
m/s
mm/s
in/s
Temperature
°C
°F
Speed rpm
Supply Voltage V
2.6.2 Configuration defaults
Table 2-2: Configuration Values
Configuration option Default value
Network ID 1234
Join Key 12340000 00000000 00000000 00000000
Message WIRELESS VIBRATION TRANSMITTER
Description ASSET NAME
Default Long Tag Format VX WWYYTTTTTTT
Default Short Tag Format VXAABBCC
Update Rate 60 minutes
Mounting Method Not Set
Motor Type Not Set
Line Frequency Not Set
VFD Not Set
Machine Noise Threshold 0.05 in/sec
Nameplate Speed RPM 0 rpm
Driver/Driven Ratio 1
X_YLOR 1600 lines
X_YFMIN 2 Hz
Configuration User Guide
August 2020 MHM-97927-PBF
38 MHM-97927-PBF, Rev 1

Emerson AMS Wireless Vibration Monitor Specifications

General

Brand	Emerson
Model	AMS Wireless Vibration Monitor
Category	Monitor
Language	English