Emerson FB1200 User Manual

Emerson FB1200 Flow Computer Instruction Manual
D301782X012
March 2019
ATEX Non-Sparking Zone 2Certifications 99
Appendix C: ATEX Non-Sparking Zone 2
Certifications
This appendix includes notes on ATEX certifications. For full details, please refer to the Emerson
FB1200 Flow Computer Safe Use Instructions (D301769X012).
Special Conditions of Use:
▪ Make provisions to ensure, in the event of transient disturbances, that the rated voltage does
not exceed 140% of the peak rated voltage.
▪ Impact tests on the display were conducted based on Group II values for the low risk of
mechanical danger, in accordance with Table 13 of both EN 60079-0:2012+A11:2013 and
IEC 60079-0 6
th
Edition. Install flow computers with displays in areas where the risk of impact
is low.
▪ Lead Acid Battery, and Solar Panel options are not for use in ATEX/ IECEx applications.
▪ For Zone 2 installation, take care to install and use the flow computer in such a way that
excludes the danger of electrostatic charge.
▪ Refer to field replacement guides for replacement of the following parts:
Replacement Part
Kit Number
Field Replacement Guide
document number
End Caps
399122-01-0 and
399123016-KIT
D301814X012
HMI Module Display Assembly
399379-01-0, 621627011-
KIT, 399380-01-0,
621627020-KIT
D301816X012
CPU Board
399134018-KIT
D301802X012
Termination Board and
Terminal Block
399185-01-1, 400216010-
KIT, 395791014-KIT
395803000-KIT
D301820X012
6-Channel I/O Expansion
Board
400215-01-0
D301819X012
Sensor Assembly
Variable Kit Number
D301842X012
Coin Cell Battery
395620-03-1
D301854X012
This device was evaluated according to the following standards:
▪
IEC 60079-0 6th Edition
▪
IEC 60079-15 4th Edition
▪
EN 60079-0 :2012+A11:2013
▪
EN 60079-15:2010

Emerson FB1200 Specifications

General

Brand	Emerson
Model	FB1200
Category	Measuring Instruments
Language	English