Environnement MP101M User Manual

Environnement S.A MP101M Duplication prohibited
SEPTEMBER 2013
3–2
3.3.6.2 TESTS  Arm7 inputs - outputs 3–47
3.3.6.3 TESTS  Mother board inputs - outputs 3–48
3.3.6.4 TESTS  Gauge test 3–52
3.3.6.5 TESTS  Mass test 3–55
3.3.7 I2C CARD(S) 3–59
3.3.7.1 I2C CARD(S)  Estel card(s) 3–59
3.3.7.2 I2C CARD(S)  RST board 3–60
3.3.7.3 I2C CARD(S)  CPM board 3–61
3.3.8 USB FLASH DRIVE 3–62
3.3.8.1 USB FLASH DRIVE  Flash drive information 3–63
3.3.8.2 USB FLASH DRIVE  Backup data 3–64
3.3.8.3 USB FLASH DRIVE  Erase flash drive data 3–65
3.3.8.4 USB FLASH DRIVE  System restoration 3–65
3.3.8.5 USB FLASH DRIVE  Withdraw 3–66
Figure 3–1 – Fluids and electric connection 3–4
Figure 3–2 – Menu and sub-menu tree 3–9
Figure 3–3 – Reference gauge insertion 3–22
Figure 3–4 – Putting in place the reference gauge 3–57
Figure 3–5 – USB disk 3–62
Table 3-1 – DB37 and DB25 connector links 3–3
Table 3-2 – Multiplexer (MUX) signals (Acceptable limits on channel 1 to 16 of the multiplexer) 3–46

Environnement MP101M Specifications

General

Brand	Environnement
Model	MP101M
Category	Monitor
Language	English