EPOS EXPAND 80 User Manual

EXPAND 80 Bluetooth Speakerphone
Using the speakerphone 18
Using the speakerphone
Turning the speakerphone and the expansion microphone(s) on
X Press the Power on/o button.
The LED lights up white. The expansion microphone turns on automatically and the LED lights up dimmed.
Connecting / disconnecting Bluetooth
®
devices
Connecting Bluetooth devices
Depending on the setting for personal/shared mode (see page 27).
A: Shared mode
The speakerphone is by default in shared mode. In this mode pairing must be performed every time when connecting a
device via Bluetooth.
• B NFC see page 14 or
• C Bluetooth see page 15 or
• D Dongle see page 16
B: Personal mode
The speakerphone will by default attempt to connect to the two last connected Bluetooth devices.
3x
X Activate Bluetooth on the paired device(s).
The LED ashes blue while the speakerphone attempts to connect to previously paired Bluetooth device(s). Once the
connection is successfully established, the LED lights up blue.
If the Bluetooth LED does not ash blue (automatic search after switch-on):
X Press the Bluetooth button to connect manually.
i
Only two out of the maximum eight paired Bluetooth devices can be simultaneously connected to the
speakerphone.
The search for paired devices will timeout if no devices are found. After this, connections must be established
manually on the paired Bluetooth device or by pressing the Bluetooth button on the speakerphone

EPOS EXPAND 80 Specifications

General

Brand	EPOS
Model	EXPAND 80
Category	Speakers
Language	English