EXPAND 80 Bluetooth Speakerphone
Good to know27
Good to know
Switching between Bluetooth
®
personal and shared mode
A
2s
B
2s
Activating Personal mode
If the speakerphone is used as a personal device it will
automatically attempt to connect to the last eight paired
devices.
In this setup the Personal Mode should be used.
X Press the Bluetooth and + button.
A voice prompt is announced.
Activating Shared mode
If the speakerphone is used as a shared device automatic
connection to previously paired devices may not be
desired.
In this setup the Shared Mode (default) should be used.
In this mode pairing must be performed every time when
connecting a device via Bluetooth.
X Press the Bluetooth and – button.
A voice prompt is announced.
After change of mode, the pairing list is cleared and you have to pair devices again (see page 16).
Waking up from standby
zzz
The speakerphone enters standby mode automatically
after some time to save energy – depends on connection
status, activity etc.
While in standby the Call & status LED is dimmed and all
other LEDs are o.
X Press any button to end the standby mode.