You can project movies smoothly by using Movie Sending Mode.
Related Links
• "Using Additional Functions" p.34
• "Supported Movie Files" p.37
• "Using Movie Sending Mode" p.37
Supported Movie Files
The following movie file types are supported.
a
You cannot project files protected by digital rights management
(DRM).
File Type
(Extension)
Movie Codec Audio Codec Recording Quality
.mpg
.mpeg
MPEG-2 MPEG-1 Layer 1/2
You can play MPEG
contents without audio.
Linear PCM and AC-3
are not supported.
Maximum frame
rate: 30 fps
Maximum resolu-
tion: 1280 × 720
.mp4 MPEG-4 ASP
H.264/MPEG-4
AVC
MPEG-4
AAC-LC
.wmv
.asf
WMV9 WMA
Related Links
• "Projecting Movies" p.37
Using Movie Sending Mode
You can send movie files directly to the projector by using Movie Sending
Mode. This allows smoother play back of movies than by projecting them
from another application on your computer.
You can also select multiple files and play them repeatedly from first to
last.
a
• Some projectors may not support Movie Sending Mode.
• You can use Movie Sending Mode to send a movie to a single
projector. You cannot send a movie to multiple projectors at the
same time using Movie Sending Mode.
• The image and sound may skip or stop depending on the
communication method and electromagnetic wave conditions.
a
Make sure the toolbar display is set to Full.
b
Click the button on the toolber.
The projector selection screen is displayed.
Projecting Movies
37
To Next Page
Need help?
General