Error Messages when Searching for and Selecting
Projectors
Error Messages Remedy
Cannot connect to the pro-
jector using this version of
EasyMP Network Connec-
tion. Install the latest ver-
sion of EasyMP Network
Projection.
Install the current version of EasyMP Network
Projection from the EPSON Projector Software
CD-ROM supplied with the projector.
You can download the latest version of EasyMP
Network Projection from the Epson Web site.
Connection to the projector
failed.
Try connecting again. If you still cannot connect to
the projector, check the network settings on the
computer and the network settings for the pro-
jector.
The keyword does not
match. Re-enter the key-
word displayed on the pro-
jector screen.
Check the Projector Keyword displayed on the
LAN standby screen, and enter the Projector Key-
word.
Connection failed due to
keyword mismatch.
Enter the keyword dis-
played on the projector
screen.
The selected projector is
busy. Do you want to con-
tinue the connection proc-
ess?
If you click Yes, a connection to the projector is
established. The projector is disconnected from the
other computer.
If you click No, a connection to the projector is
not established. The connection between the pro-
jector and the other computer is maintained.
One or more connected
projectors do not support
resolutions greater than
SXGA. Reduce the screen
resolution and reconnect.
There is an uncompatible projector in the con-
nection destination. Change the computer screen
resolution to SXGA (1280 × 1024) or less.
Error Messages Remedy
One or more projectors are
not responding.
Check the network settings on the computer and
the network settings on the projector.
The wireless LAN is off.
Turn on the wireless LAN,
and then try searching
again.
Turn on your computer's wireless LAN, and then
try searching for the projector again.
Related Links
• "Error Messages List" p.57
• "Supported Resolutions" p.80
• "Uninstalling EasyMP Network Projection (Windows XP/Windows Vista/
Windows 7)" p.78
• "Uninstalling EasyMP Network Projection (Windows 8)" p.78
• "Uninstalling EasyMP Network Projection (Mac OS X)" p.79
• "Getting the Latest Version of the Application" p.78
• "Installing EasyMP Network Projection (Windows)" p.11
• "Installing EasyMP Network Projection (Mac OS X)" p.11
Error Messages when Projecting
Error Messages Remedy
XXXXXX was disconnected. Try connecting again. If you still cannot
connect to the projector, check the net-
work settings on the computer and the
network settings for the projector.
To output audio from the projector,
restart applications such as Power-
Point or Windows Media Player.
Restart PowerPoint or Windows Media
Player. Audio is then output from the
projector.
Error Messages List
58
To Next Page
Loading...
Need help?
General