q
• If you use this function when projecting moving images, the
images and sound continue to be played back by the source, and
you cannot return to the point where A/V Mute was activated.
• When activated from the remote control, you can choose to
display Black, Blue, or Logo as the A/V Mute display using the
Extended - Display - A/V Mute setting from the Configuration
menu.s p.53
• When the A/V mute slide is closed, and no operations are made
for approximately 30 minutes, Lens Cover Timer activates and
the power is automatically turned off. If you do not want Lens
Cover Timer to activate, change the Lens Cover Timer setting to
Off from Operation in the Extended menu.s p.53
Freezing the Image (Freeze)
When Freeze is activated on moving images, the frozen image continues
to project on the screen, so you can project a moving image one frame
at a time like a still photo. Also, you can perform operations such as
changing between files during presentations from a computer without
projecting any images if the Freeze function is activated beforehand.
Procedure
Remote Control
Each time you press the button, Freeze turns on or off.
q
• Audio does not stop.
• The image source continues to play back the moving images
even while the screen is frozen, and so it is not possible to
resume projection from the point where it was paused.
• If the [Freeze] button is pressed while the Configuration Menu
or a Help screen is displayed, the menu or Help screen being
displayed is cleared.
• Freeze still works while E-Zoom is being used.
Functions for Enhancing Projection
26
To Next Page
Loading...
Need help?
General
